Choose the format against a measured layout, not the surface pattern alone. Ask suppliers to mark proposed joins, cut edges, fixing points and replacement areas on the same drawing. A roll layout with fewer joins is not automatically the better installation; an interlocking layout is not automatically suitable for every area or cleaning system.
For each option, request a marked-up plan showing the actual quoted product dimensions. Include columns, gates, corners, drains and transitions to uncovered flooring. Compare purchased quantity and usable coverage separately. Do not treat a roll's full area or a mat's nominal outside dimensions as confirmed installed coverage.
![]()
Decision | Ask about a roll layout | Ask about an interlocking layout |
Area shape | Where will lengths be cut and where will adjoining strips meet? | How will the proposed module arrangement fit corners and obstructions? |
Joins and edges | How are butt joins, perimeter edges and cut ends treated? | What is the confirmed locking geometry and how are exposed perimeter edges finished? |
Fixing | What fixing arrangement is specified for this model and floor? | Does this model require fixing despite having interlocking edges? |
Cleaning | How will joins, drains and floor transitions interact with the site's cleaning equipment? | How will joints and perimeter details interact with that same cleaning routine? |
Replacement | What area would need to be removed for a local repair? | Can the proposed layout be opened locally, and what access is required? |
Order quantity | What cutting allowance and offcut use are included? | What usable coverage, edge pieces and spare pieces are included? |
A format name does not specify an installation method. Request the model-specific installation information before accepting a layout. Identify who is responsible for floor assessment, preparation, cutting, fixing, joint treatment and final inspection. If those activities are outside the quotation, ask the supplier to identify the exclusions.
![]()
Do not infer a cleaning method, scraper compatibility or drainage result from a photograph. Share the site's cleaning routine, equipment and drain locations so the proposed interface can be reviewed. Fixing details and cut-edge treatment remain subject to technical confirmation; this section is not an installation procedure.
· Mark the intended use area, measured dimensions, obstructions, entrances, drains and changes in floor level.
· Describe the existing floor, traffic and cleaning equipment. Add site photos where available.
· Ask for the quoted model, surface and underside identification, confirmed dimensions and usable coverage basis.
![]()
· Request proposed join locations, perimeter treatment, fixing scope and installation exclusions.
· Ask how a damaged section would be replaced in that layout and whether matching spare material is included.
· Compare net coverage, purchased quantity, packing and the complete quoted scope, not unit price alone.
Missing site information should remain visible on the proposal. A supplier should not resolve it by assuming an unobstructed rectangular floor or a universal fixing method.
Are rolls always better because there are fewer joints?
No. Ask how the actual roll sizes fit the measured area and how joins, edges, cutting and later repair would be handled. Joint count is one comparison item, not an installation approval.
Does interlocking mean that no fixing is needed?
Do not assume that. Ask for the installation instructions for the exact quoted model and have the fixing arrangement reviewed against the floor and use area.
Can the same cleaning system be used with either format?
That remains project-specific. Provide the equipment and cleaning routine and request confirmation for the proposed model, joins and edges. Format alone does not establish compatibility.
What should I send GRAND RUBBER first?
Send a measured layout and identify the use area. Include the cleaning equipment and any requirement for local replacement. Ask for confirmation of available formats and model-specific dimensions, joining and fixing details before approving a quotation.
Inquiry Now